Allied Telesis AT-S60 - Manual (Page 164)

AT-S60 Management Software User’s Guide
Section II: Local and Telnet Management 163
Downloading a File Using Xmodem
To download certificate, certificate enrollment requests, configuration,
and key files using Xmodem, perform the following procedure:
1. Type X at the prompt displayed in Step 4 in the procedure that begins
on page 161.
The following prompt is displayed
Local file name:
2. Enter the local file name.
This will be the name of the of the file after it is downloaded to the
switch.
The following prompt is displayed:
You are going to invoke the Xmodem download utility.
Do you wish to continue? [Yes/No]
3. Type Y.
The following prompt is displayed:
Use HyperTerminal’s ‘Transfer/Send File’ option to
select Filename & Protocol
4. In the HyperTerminal main window, select the Transfer menu. Then
select Send File from the pull-down menu, as shown in Figure 50.
Figure 50 Transfer Menu