Allied Telesis AT-S60 - Manual (Page 547)

Chapter 36: MAC Address Table
Section IV: Web Browser Management 546
Deleting MAC Addresses
To delete a static, dynamic, or multicast MAC address from the switch,
perform the following procedure:
1. From the Home Page, select Configuration.
The Configuration System page is displayed with the General tab
selected by default, as shown in Figure 155 on page 434.
2. From the Configuration menu, select the Layer 2 option.
The Layer 2 page is displayed with the MAC Address tab selected
by default, as shown in Figure 204 on page 541.
3. Select one of the MAC address options.
For instructions, refer to Displaying the MAC Address Table on
page 541.
4. Click View.
The MAC Address Table is displayed as shown in Figure 205 on
page 542.
5. Click the circle next to the MAC address that you want to delete from
the switch.
6. Click Remove.
The address is removed from the MAC address table.
7. Click Close.
The MAC Addresses Table page is displayed as shown in Figure
204 on page 541.
8. Click Close.
The MAC Address tab is redisplayed. Your changes are
immediately activated on the switch.
9. To save your changes, return to the General tab and click Save
Changes. Your changes are saved on the switch.