Allied Telesis AT-S60 - Manual (Page 379)

Chapter 21: Public Key Infrastructure (PKI)
Section III: Security Features 378
Generating Enrollment Requests
To request a certificate from a Certificate Authority, you need to
generate an enrollment request. By generating an enrollment request,
you create a file with a .csr extension. After you have generated an
enrollment request file, upload the file to a CA. For a complete list of all
the steps to configure the switch to obtain a CA certificate, see
Configuring CA Certificates on page 338.
To generate an enrollment request, perform the following procedure:
1. From the Main Menu, type 6 to select Security Menu.
The Security Menu is shown in Figure 30 on page 105.
2. From the Security menu, select the Keys/Certificate Configuration
menu.
The Keys/Certificate Configuration Menu is shown in Figure 121
on page 348.
3. From the Keys/Certificate menu, select 3 - Public Key Infrastructure
(PKI) Configuration.
The Public Key Infrastructure (PKI) Configuration menu is shown
in Figure 126 on page 365.
4. From the Public Key Infrastructure (PKI) Configuration Menu, type 3
to generate an enrollment request.
The Generate Enrollment Request Menu is shown in Figure 133.
Allied Telesyn AT-8400 Series - ATS60 V2.0.0
High School Switch 142
User: Manager 00:14:33 30-Apr-2003
Generate Enrollment Request Menu
1 - Request Name....................
2 - KeyPair ID ..................... 0
3 - Format ......................... PEM
4 - Type ........................... PKCS10
5 - Generate Enrollment Request
R - Return to Previous Menu
Enter your selection?