Allied Telesis AT-S60 - Manual (Page 129)

Chapter 9: Port Mirroring
Section II: Local and Telnet Management 128
Modifying a Source Port Mirror
Use the following procedure to add, delete, set (overwrite), or clear a
source port mirror. For information about how to specify a port, see
Specifying Ports on page 31.
To modify a source port mirror, perform the following procedure:
1. From the Main Menu, type 1 to select Port Menu.
The Port Menu is shown in Figure 25 on page 89.
2. From the Port Menu, type 5 to select Port Mirroring.
The Port Mirroring menu is shown in Figure 38 on page 126.
3. Type 2 to select Modify Mirror.
The Modify Mirror Menu is shown in Figure 39.
Figure 39 Modify Mirror Menu
4. Select 1- Add Source Port(s) to add a source port mirror to a current
list.
The following prompt appears:
Enter Destination Port:
5. Enter the destination mirror port from the list at the top of the menu
and press Return.
For information about how to specify a port, see Specifying Ports
on page 31.
Allied Telesyn AT-8400 Series - ATS60 V2.0.0
High School Switch 142
User: Manager 00:14:33 15-Jan-2003
Modify Mirror
Destination Mirror Port Source Mirror Port(s) Status
------------------------------------------------------------
3.4 8.4, 9.6 Enabled
4.5 10.1, 11.1, 12.1 Enabled
1 - Add Source Port(s)
2 - Delete Source Port(s)
3 - Set Source Port(s)
4 - Clear Source Port(s)
U - Update Display
R - Return to Previous Menu
Enter your selection?