Allied Telesis AT-S60 - Manual (Page 316)

AT-S60 Management Software User’s Guide
Section II: Local and Telnet Management 315
The following prompt is displayed:
Please enter MAC address ->
4. Enter the static MAC address in the following format:
XXXXXX XXXXXX
Once you have specified the MAC address, the following prompt
is displayed:
Enter port-list:
5. Enter the number of the port on the switch where you want the
address assigned.
The management software adds the address to the MAC address
table.
6. Repeat this procedure starting with step 3 to enter additional static or
multicast MAC addresses.
7. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.