Allied Telesis AT-S60 - Manual (Page 526)

AT-S60 Management Software User’s Guide
Section IV: Web Browser Management 525
6. Modify the VLAN parameters by referring to Step 6 through Step 7 in
the previous procedure, Creating a VLAN on page 521.
When you modify a VLAN, observe the following guidelines:
❑ You cannot change the VID of a VLAN.
❑ You cannot change the name of any VLAN.
7. After making the desired changes, click Apply.
The modified VLAN is now ready for network operations.
Note
Untagged ports that are added to a VLAN are automatically
removed from their current VLAN assignment. Untagged ports that
are removed from a VLAN are returned to the Default_VLAN.
8. To save your changes, return to the General tab and click Save
Changes. The changes you made are saved on the switch.