Allied Telesis AT-S60 - Manual (Page 317)

Chapter 16: MAC Address Table
Section II: Local and Telnet Management 316
Deleting MAC Addresses
This section contains the procedure for deleting static and dynamic
unicast and multicast MAC addresses from the MAC address table and
for purging the table of all dynamic addresses.
To delete MAC addresses from the table, perform the following
procedure:
1. From the Main Menu, type 7 to select MAC Address Tables.
The MAC Address Tables menu is shown in Figure 112 on page
310.
2. From the MAC Address Tables menu, type 1 to select Configure MAC
Addresses.
The Configure MAC Addresses menu is shown in Figure 115 on
page 314.
3. To delete a MAC address from the table, do the following:
a. From the Configure MAC Addressed menu, type 2 to select Delete
MAC Address.
The following prompt is displayed:
Please enter a MAC address ->
b. Enter the MAC address you want deleted from the table in the
following format:
XXXXXX XXXXXX
Note
You cannot delete the switch’s MAC address.
The address is immediately deleted from the table.
c. Repeat the procedure to delete additional MAC addresses.
d. Return to the Main Menu and type S to select Save Configuration
Changes.
4. To delete all dynamic MAC addresses from the table, do the following:
a. From the Configure MAC Addressed menu, type 3 to select Delete
All dynamic MAC Addresses.
The following prompt is displayed:
All learned MAC (non-static) addresses will be
deleted.
Do you want to continue? [Yes/No] ->