Allied Telesis AT-S60 - Manual (Page 179)

Chapter 11: File Downloads and Uploads
Section II: Local and Telnet Management 178
4. In the HyperTerminal main window, select the Transfer menu. Then
select Receive File from the pull-down menu, as shown in Figure 59.
Figure 59 Transfer Menu
The Receive File window in Figure 60 is shown.
Figure 60 Receive File Window
5. In the Place received file in the following folder field, type the path to
the destination folder, or click the Browse button to locate the
destination folder.
6. Click on the Protocol field and select as the transfer protocol either
Xmodem or, for a faster download, 1K XModem.
7. Click Receive.
The Receive filename window is displayed, as shown in Figure 61.
Figure 61 Receive Filename Window