Allied Telesis AT-S60 - Manual (Page 457)

Chapter 27: Basic Switch Parameters
Section IV: Web Browser Management 456
Downloading a New Software Version
You can download a new software version to your switch using TFTP and
then reboot the switch to initialize the new files using the web interface.
Note
You can only download a .img file type (image file) using the web
interface. To download any other file type (.cer, .cfg., etc.) use either
the Telnet or local interface. See (x-ref local File System chapter) for
more information about file types. See (x-ref local
Upload/Download chapter) to download or upload other file types.
1. From the Home Page, select Configuration.
The Configuration System page is displayed with the General tab
selected by default, as shown in Figure 155 on page 434.
2. Select the System Maintenance tab.
The System Maintenance tab is shown in Figure 164.
Figure 164 Configuration System Page, System Maintenance Tab