Allied Telesis AT-S60 - Manual (Page 523)

Chapter 34: Virtual LANs
Section IV: Web Browser Management 522
The Add New VLAN page is shown in Figure 196.
Figure 196 Add New VLAN Page
5. In the VID field, enter a VID value for the new VLAN. The range of the
VID value is 2 to 4094. The default is the next available VID number on
the switch.
If this is a unique VLAN in your network, its VID must be unique as well.
However, if the VLAN is to be part of a larger VLAN that spans multiple
switches, assign the same VID value on each switch. For example, if
you are creating a VLAN called Sales that spans three switches, you
must assign the same VID value to each Sales VLAN on all three
switches.
Note
You must assign a VID to a VLAN.
6. In the Name field, enter a name for the new VLAN.