Allied Telesis AT-S60 - Manual (Page 208)

AT-S60 Management Software User’s Guide
Section II: Local and Telnet Management 207
Configuring
RSTP Port
Parameters
To adjust a port’s RSTP parameters, perform the following procedure:
1. From the Spanning Tree Menu, type 4 to select RSTP Configuration.
The RSTP Menu is shown in Figure 72 on page 205.
2. From the RSTP Configuration menu, type P to select RSTP Port
Parameters.
The RSTP Port Parameters Menu is shown in Figure 73.
Figure 73 RSTP Port Parameters Menu
3. Type 1 to select Configure RSTP Port Settings.
The following prompt is displayed:
Enter port-list:
Allied Telesyn AT-8400 Series - ATS60 V2.0.0
High School Switch 142
User: Manager 00:14:33 15-Jan-2003
RSTP Port Parameters
1 - Configure RSTP Port Settings
2 - Display RSTP Port Configuration
3 - Display RSTP Port State
R - Return to Previous Menu
Enter your selection?