Allied Telesis AT-S60 - Manual (Page 527)

Chapter 34: Virtual LANs
Section IV: Web Browser Management 526
Deleting a VLAN
To delete a port-based or tagged VLAN from the switch, perform the
following procedure:
1. From the Home Page, select Configuration.
The Configuration System page is displayed with the General tab
selected by default, as shown in Figure 155 on page 434.
2. From the Configuration menu, select the Layer 2 option.
The Layer 2 page is displayed with the MAC Address tab selected
by default, as shown in Figure 204 on page 541.
3. Select the VLAN tab.
The VLAN tab is shown in Figure 195 on page 521.
4. Click the circle next to the name of the VLAN you want to delete.
5. Click Remove.
A confirmation prompt is displayed.
6. Click OK to delete the VLAN or Cancel to cancel the procedure.
If you click OK, the VLAN is deleted from the switch. The untagged
ports in the VLAN are returned to the Default_VLAN as untagged
ports.
Note
You cannot delete the Default_VLAN.
7. To save your changes, return to the General tab and click Save
Changes. The changes you made are saved on the switch.