Allied Telesis AT-S60 - Manual (Page 415)

Chapter 25: 802.1x Port-Based Access Control
Section III: Security Features 414
The Configure Port Access Role Menu is shown in Figure 145.
Figure 145 Configure Port Access Role Menu
5. Type 1 to select Port Role. The following prompt is displayed:
Enter new Port Role [N-None, A-Authenticator, S-
Supplicant] ->
6. Choose from the following:
Type A to select Authenticator. With this selection, the port
performs the role of authenticating the supplicants that are
connected to the port.
Type S to select Supplicant. With this selection, the port becomes
a Supplicant to the Authenticator port.
Type N to select None. If you select None, the port does not
participate in port access control. The default for this parameter is
None.
Then Press Return. The Port Access Control Menu is displayed.
7. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Allied Telesyn AT-8400 Series - ATS60 V2.0.0
High School Switch 142
User: Manager 00:14:33 01-Jan-2003
Configure Port Access Role
Configuring Port 3.1
1 - Port Role ......... None
R - Return to Previous Menu
Enter your selection?