Allied Telesis AT-S60 - Manual (Page 513)

Chapter 33: STP, RSTP, and MSTP
Section IV: Web Browser Management 512
Deleting an MSTI ID
To delete an MSTI ID, do the following:
1. Display the Spanning Tree Expanded page for MSTP by performing
Steps 1 through 4 in the procedure Configuring MSTP Parameters
on page 507.
2. In the CIST/MSTI Table section of the tab, click the circle next to the
MSTI ID you want to delete. You can select only one MSTI ID at a time.
3. Click Remove.
4. A confirmation prompt is displayed.
5. Click OK to delete the MSTI or Cancel to cancel the procedure.
6. If you select OK, the MSTI is deleted and VLANs associated with it are
returned to CIST, which has an ID of 0.
Modifying an MSTI ID
To modify an MSTI ID, do the following:
1. Display the Spanning Tree Expanded page for MSTP by performing
Steps 1 through 4 in the procedure Configuring MSTP Parameters
on page 507.
2. In the CIST/MSTI Table section of the tab, click the circle next to the
MSTI ID you want to modify. You can select only one MSTI ID at a time.
You cannot modify CIST.
3. Click Modify.
The Modify MSTI page is displayed as shown in Figure 190.
Figure 190 Modify MSTI Page