Brocade Network OS Administrator’s Guide v4.1.1 User Manual
Page 743

guidelines and restrictions
Q
QoS
data center bridging map configuration overview
port-based policer
binding the policy map to an interface
configuring a police priority map
configuring parameters for a class map
configuring the policy map
considerations and limitations
displaying policing settings and policy maps
policing parameters
queuing
traffic class mapping
QoS configuration procedures
activating CoS-to-Traffic-Class mapping
activating DSCP-to-Traffic-Class mapping
applying a CEE provisioning map
applying a CoS-to-CoS mutation QoS map
applying a DCB provisioning map
applying a DSCP-to-COS mutation map
changing the multicast Tail Drop threshold
configuring Brocade VCS fabric QoS
configuring CoS thresholds
configuring RED profiles
configuring the DSCP trust mode
configuring user priority mappings
creating a CoS-to-CoS mutation QoS map
creating a DSCP mutation map
creating a DSCP-to-COS mutation map
creating a receive queue multicast rate-limit
defining a priority group table
enabling Ethernet pause
enabling RED prfile to use CoS priority
mapping a priority group table
mapping a priority-table
scheduling the QoS multicast queue
verifying a DSCP-to-COS mutation map
verifying CEE maps
verifying CoS-to-CoS mutation QoS mapping
verifying CoS-to-Traffic-Class mapping
verifying DSCP mutation mapping
verifying DSCP-to-Traffic-Class mapping
Quality of Service. , See QoS
querier
interval
queuing
FCoE
QoS
Network OS Administrator’s Guide
743
53-1003225-04