Brocade Network OS Administrator’s Guide v4.1.1 - Manual (Page 647)

NOTE
Refer to the Network OS Command Reference for additional information on IGMP CLI commands.
Using additional IGMP commands
The following commands provide additional support for basic IGMP functionality. For details, refer to the
Network OS Command Reference.
Command Description
ip igmp immediate-
leave Removes a group from the multicast database. Use this command to treat the interface as if
it had one multicast client, so that a receipt of a Leave Group request on the interface
causes the group to be immediately removed from the multicast database.
ip igmp static-
group Configures the static group membership entries for a specific interface.
Using additional IGMP commands
Network OS Administrator’s Guide 647
53-1003225-04