beautypg.com

Brocade Network OS Administrator’s Guide v4.1.1 User Manual

Page 126

background image

!

sw87#

4. Check the state of the system by using the following show commands.

a)

Verify that all the nodes to be upgraded are running the same version, by using the show
version
command.

sw87# show version

Network Operating System Software

Network Operating System Version: 3.0.1

Copyright (c) 1995-2012 Brocade Communications Systems, Inc.

Firmware name: 3.0.1c

Build Time: 23:15:48 Oct 18, 2013

Install Time: 04:27:13 Dec 3, 2013

Kernel: 2.6.34.6

BootProm: 2.2.0

Control Processor: e500v2 with 2048 MB of memory

Appl Primary/Secondary Versions

------------------------------------------

NOS 3.0.1c

3.0.1c

sw87#

b)

Verify the state of the fabric, by using the show fabric all command.

sw87# show fabric all

VCS Id: 8192

Config Mode: Local-Only

Rbridge-id WWN IP Address Name

--------------------------------------------------------------

79 10:00:00:27:F8:44:50:C2 10.20.53.79 "sw79"

81 10:00:00:05:33:FA:44:08 10.20.53.81 "sw81"

86 10:00:00:27:F8:0C:D1:BD 10.20.53.86 >"sw86"

87 10:00:00:05:33:FA:4A:48 10.20.53.87 "sw87"*

The Fabric has 4 Rbridge(s)

sw87#

c)

Verify that all fabric ISLs are up, by using the show fabric isl command.

sw87# show fabric isl

Rbridge-id: 87 #ISLs: 3

Src Src Nbr Nbr

Index Interface Index Interface Nbr-

WWN BW Trunk Nbr-Name

---------------------------------------------------------------------------

----

0 Te 87/0/1 14 Te 79/0/15 10:00:00:27:F8:44:50:C2

10G Yes "sw79"

3 Te 87/0/4 7 Te 86/0/8 10:00:00:27:F8:0C:D1:BD

10G Yes "sw86"

4 Te 87/0/5 3 Te 81/0/4 10:00:00:05:33:FA:44:08

10G Yes "sw81"

sw87#

d)

Verify the state of the port-channels, by using the show port-channel summary
command.

sw87# show port-channel summary

LACP Aggregator: Po 6144 (vLAG)

Aggregator type: Standard

Ignore-split is enabled

Member rbridges:

rbridge-id: 86 (16)

rbridge-id: 87 (16)

Admin Key: 6144 - Oper Key 6144

Member ports on rbridge-id 87:

Link: Te 87/0/9 (0x5718050008) sync: 1

Link: Te 87/0/10 (0x5718050009) sync: 1

Link: Te 87/0/11 (0x571805800A) sync: 1

Link: Te 87/0/12 (0x571806000B) sync: 1

Link: Te 87/0/13 (0x571806800C) sync: 1

Installing and Maintaining Firmware

126

Network OS Administrator’s Guide

53-1003225-04