Brocade Network OS Administrator’s Guide v4.1.1 - Manual (Page 728)

Unsupported Network OS CLI commands in privileged EXEC mode (Continued) TABLE 108
Command name Command Description
show ssm Displays the switch services subsystem.
show startup-db Displays the startup configuration.
show storm-control Displays storm control configuration.
show statistics Displays accounting information.
show system Displays runtime system information.
show rmon Displays the Remote Monitoring Protocol (RMON) configuration.
show vcs Displays VCS information.
show vlan Displays the VLAN configuration
show mac-address-table Displays the MAC address table.
show startup-config Displays the contents of the startup-configuration file.
show zoning Displays zoning information.
traceroute Executes the traceroute command.
The following table lists the Network OS CLI commands that are not supported in global configuration
mode.
Unsupported Network OS CLI commands in global configuration mode TABLE 109
Command name Command Description
abort Aborts the current configuration session.
diag Manages diagnostic commands.
do Executes an operational command while in global configuration mode.
end Terminates the current configuration session.
exit Exits from the current mode.
help Provides help information.
pwd Displays the current mode path.
service Performs password encryption services.
top Exits to the top level and optionally runs a command.
no vlan Disables VLAN configuration.
TACACS+ Accounting Exceptions
728 Network OS Administrator’s Guide
53-1003225-04