Brocade Network OS Administrator’s Guide v4.1.1 User Manual
Page 127
Link: Te 87/0/14 (0x571807000D) sync: 1
Link: Te 87/0/15 (0x571807800E) sync: 1
Link: Te 87/0/16 (0x571808000F) sync: 1
Link: Te 87/0/17 (0x5718088010) sync: 1
Link: Te 87/0/18 (0x5718090011) sync: 1
Link: Te 87/0/19 (0x5718098012) sync: 1
Link: Te 87/0/20 (0x57180A0013) sync: 1
Link: Te 87/0/21 (0x57180A8014) sync: 1
Link: Te 87/0/22 (0x57180B0015) sync: 1
Link: Te 87/0/23 (0x57180B8016) sync: 1
Link: Te 87/0/24 (0x57180C0017) sync: 1
sw87#
e)
Verify that the required ports and port-channels are up, by using the show ip interface
brief command.
sw87# show ip interface brief
Interface IP-Address Status Protocol
========================== ========== ==================== ========
Port-channel 6144 unassigned up up
TenGigabitEthernet 87/0/1 unassigned up up (ISL)
TenGigabitEthernet 87/0/2 unassigned up down
TenGigabitEthernet 87/0/3 unassigned administratively down down
TenGigabitEthernet 87/0/4 unassigned up up (ISL)
TenGigabitEthernet 87/0/5 unassigned up up (ISL)
TenGigabitEthernet 87/0/6 unassigned up down
TenGigabitEthernet 87/0/7 unassigned up down
TenGigabitEthernet 87/0/8 unassigned up up
TenGigabitEthernet 87/0/9 unassigned administratively down down
TenGigabitEthernet 87/0/10 unassigned up up
f)
Verify the number of MAC addresses in the cluster and other details, by using the show
mac-address-table count and show mac-address-table commands.
sw87# show mac-address-table count
Dynamic Address Count : 11
Static Address Count : 0
Internal Address Count : 3
Total MAC addresses : 14
sw87#
sw87# show mac-address-table
VlanId Mac-address Type State Ports
99 0005.3378.442a Dynamic Active Po 6144
99 0005.3378.5242 Dynamic Active Po 6144
99 0005.33fa.4429 System Remote XX 81/X/X
99 0027.f80c.d1de System Remote XX 86/X/X
99 0027.f844.50e3 System Remote XX 79/X/X
208 0009.8a06.6cbd Dynamic Active Po 6144
208 0050.5656.3d02 Dynamic Remote Po 100
208 0050.5656.3d03 Dynamic Remote Po 100
208 0050.5656.3f42 Dynamic Remote Po 400
208 0050.5656.3f43 Dynamic Remote Po 400
208 0050.5661.2b00 Dynamic Remote Po 300
208 0050.566c.c929 Dynamic Remote Po 200
208 0050.56b3.18e3 Dynamic Remote Po 300
208 0050.56b3.2801 Dynamic Remote Po 400
Total MAC addresses : 14
sw87#
g)
Check the traffic rate on all the ports and port-channels along the traffic path, by using the
show interface command with the following output option.
sw87# show interface port-channel 6144 | inc rate
Queueing strategy: fifo
Input 86.487040 Mbits/sec, 84460 packets/sec, 8.65% of line-rate
Output 86.487040 Mbits/sec, 84460 packets/sec, 8.65% of line-rate
h)
Copy the running configuration to the startup configuration on all nodes, as well as to an
external FTP/SCP server (by means of the ftp:// or scp:// options, not shown here).
sw87# copy running-config startup-config
This operation will modify your startup configuration. Do you want to
continue? [y/n]:y
2013/12/05-21:30:52, [DCM-1101], 8374,, INFO, VDX6720-24, Copy running-
config to startup-config operation successful on this node.
sw87#
5. Identify the principal and multicast root nodes of the fabric.
Installing and Maintaining Firmware
Network OS Administrator’s Guide
127
53-1003225-04