Viewing the discovered virtual assets – Brocade Network OS Administrator’s Guide v4.1.1 User Manual
Page 255

• When a switch boots up.
• When a new vCenter is configured on the VDX switch and activated (activation turns on the timer
processing, set to 180-second intervals.)
• When the discovery is explicitly initiated with the CLI.
Use the vnetwork vcenter command to trigger a vCenter discovery manually.
switch# vnetwork vcenter myvcenter discover
An invalid state or condition of a vCenter can cause the deletion of all auto-port-profiles in a system. To
prevent this from happening, configure the ignore-delete-all-response operand of the vcenter command
to ignore the “delete-all” responses from the vCenter.
switch(config)# vcenter MYVC discover ignore-delete-all-response 5
Viewing the discovered virtual assets
Enter one of the following show vnetwork asset commands:
switch# show vnetwork dvpgs datacenter
datacenter_name
vcenter
vcenter_name
switch# show vnetwork dvs datacenter
datacenter_name
vcenter
vcenter_name
switch# show vnetwork hosts datacenter
datacenter_name
vcenter
vcenter_name
switch# show vnetwork pgs datacenter
datacenter_name
vcenter
vcenter_name
switch# show vnetwork vcenter status datacenter
datacenter_name
vcenter
vcenter_name
switch# show vnetwork vmpolicy
datacenter
datacenter_name
vcenter
vcenter_name
switch# show vnetwork vms datacenter
datacenter_name
vcenter
vcenter_name
switch# show vnetwork vss datacenter
datacenter_name
vcenter
vcenter_name
where:
• dvpgs — Displays discovered distributed virtual port groups.
• dvs — Displays discovered distributed virtual switches.
• hosts — Displays discovered hosts.
• pgs — Displays discovered standard port groups.
• vcenter status — Displays configured vCenter status.
• vmpolicy — Displays the following network policies on the Brocade VDX switch: associated media
access control (MAC) address, virtual machine, (dv) port group, and the associated port profile.
• vms — Displays discovered virtual machines (VMs).
• vss — Displays discovered standard virtual switches.
Refer to the Network OS Command Reference for detailed information about the show vnetwork
commands.
Viewing the discovered virtual assets
Network OS Administrator’s Guide
255
53-1003225-04