Deleting a port-profile, Deleting a sub-profile, Monitoring ampp profiles – Brocade Network OS Administrator’s Guide v4.1.1 User Manual
Page 335

The following example activates the mode for the 10-gigabit Ethernet interface in slot 0/port 0.
switch(config)# interface tengigabitethernet 1/0/1
2. Unconfigure port-profile-port on the physical interface.
switch(conf-int-te-1/0/1)# no port-profile-port
switch(conf-int-te-1/0/1)# no shutdown
Deleting a port-profile
To delete a port-profile, perform the following steps in privileged EXEC mode.
1. Enter global configuration mode.
switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
2. Deactivate the port-profile.
switch(config)# no port-profile vm1-port-profile activate
3. Use the no form of the port-profile command to delete the custom profile.
You cannot delete the default port-profile.
switch(config)# no port-profile vm1-port-profile
Deleting a sub-profile
To delete a sub-profile, perform the following steps in privileged EXEC mode.
1. Enter global configuration mode.
switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
2. Deactivate the port-profile.
switch(config)# no port-profile vm1-port-profile activate
3. Enter port-profile mode.
switch(conf-vm1-port-profile)# port-profile vm1-port-profile
4. Use the following to delete sub-profiles.
• To delete a vlan sub-profile:
switch(conf-vm1-port-profile)# no vlan-profile
• To delete a security sub-profile:
switch(conf-vm1-port-profile)# no security-profile
• To delete a fcoe sub-profile under default profile:
switch(conf-pp-default)# no fcoe-profile
• To delete a qos sub-profile:
switch(conf-vm1-port-profile)# no qos-profile
Monitoring AMPP profiles
To monitor the AMPP profiles, perform the following steps in privileged EXEC mode.
1. Use the show command to display the current MAC details.
switch# show mac-address-table port-profile
Legend: Untagged(U), Tagged (T), Not Forwardable(NF) and Conflict(C)
VlanId Mac-address Type State Port-Profile Ports
1 0050.5679.5351 Dynamic Active Profiled(U) Te 111/0/10
1 0050.567b.7030 Dynamic Active Profiled(U) Te 111/0/12
1 005a.8402.0000 Dynamic Active Profiled(T) Te 111/0/24
1 005a.8402.0001 Dynamic Active Profiled(NF) Te 111/0/24
1 005a.8402.0002 Dynamic Active Not Profiled Te 111/0/24
1 005a.8402.0003 Dynamic Active Not Profiled Te 111/0/24
1 005a.8402.0004 Dynamic Active Not Profiled Te 111/0/24
1 005a.8402.0005 Dynamic Active Profiled(NF) Te 111/0/24
Deleting a port-profile
Network OS Administrator’s Guide
335
53-1003225-04