Brocade Network OS Administrator’s Guide v4.1.1 User Manual

Page 196

FIGURE 27 LSAN zones example

The following example steps create this set of LSAN zones.

1. Obtain the host WWN in fabric_01:

On the fabric_01 switch, enter the show name-server detail command to list the WWN of
the host (10:00:00:00:c9:2b:c9:0c).

NOTE
The show name-server detail output displays both the port WWN and node WWN; the
port WWN must be used for LSANs.

switch# show name-server detail

PID: 012100

Port Name: 10:00:00:00:c9:2b:c9:0c

Node Name: 20:00:00:00:c9:2b:c9:0c

SCR: 3

FC4s: FCP

PortSymb: [27] "Brocade-1020|2.3.0.0|localhost.localdomain|Red Hat

Enterprise Linux Server release 5.5"

NodeSymb: NULL

Fabric Port Name: 20:21:00:05:1E:CD:79:7A

Permanent Port Name: 10:00:00:00:c9:2b:c9:0c

Device type: Physical Initiator

Interface: Fcoe 1/1/9

Physical Interface: Te 1/0/9

Share Area: No

Redirect: No

2. Obtain the target WWNS in fabric_02:

On fabric_02, enter the nsShow command to list Target A (50:05:07:61:00:5b:62:ed) and
Target B (50:05:07:61:00:49:20:b4).

switch:admin> nsshow

{

Type Pid COS PortName NodeName TTL(sec)

NL 0508e8; 3; 50:05:07:61:00:5b:62:ed; 50:05:07:61:00:1b:62:ed; na

FC4s: FCP [IBM DNEF-309170 F90F]

Administering Zones

196

Network OS Administrator’s Guide

53-1003225-04