Reserving a 40g qsfp port while in breakout mode – Brocade Network OS Administrator’s Guide v4.1.1 User Manual
Page 547

TenGigabitEthernet 48/0/47 unassigned default-vrf up down
TenGigabitEthernet 48/0/48 unassigned default-vrf up down
TenGigabitEthernet 48/0/49:1 unassigned default-vrf up down(ISL)
TenGigabitEthernet 48/0/49:2 unassigned default-vrf up down(ISL)
TenGigabitEthernet 48/0/49:3 unassigned default-vrf up down(ISL)
TenGigabitEthernet 48/0/49:4 unassigned default-vrf up down(ISL)
Vlan 1 unassigned administratively down down
Vlan 4093 unassigned up down
Vlan 4095 unassigned administratively down down
Reserving a 40G QSFP port while in breakout mode
The following example shows you how to reserve a 40G QSFP port while in breakout mode.
switch# config
Entering configuration mode terminal
switch(config)# dpod 48/0/
Possible completions:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38
39 40 41 42 43 44 45 46 47 48 49 50 51 52
switch(config)# dpod 48/0/49:1 reserve
Invalid InterfaceId.
switch(config)# dpod 48/0/49 reserve
switch(config-dpod-48/0/49)# do show dpod
rbridge-id: 48
48 10G ports are available in this switch
4 40G ports are available in this switch
10G Port Upgrade license is installed
40G Port Upgrade license is installed
Dynamic POD method is in use
48 10G port assignments are provisioned for use in this switch:
24 10G port assignments are provisioned by the base switch license
24 10G port assignments are provisioned by the 10G Port Upgrade license
2 10G ports are assigned to installed licenses:
2 10G ports are assigned to the base switch license
0 10G ports are assigned to the 10G Port Upgrade license
10G ports assigned to the base switch license:
48/0/1, 48/0/31
10G ports assigned to the 10G Port Upgrade license:
None
10G ports not assigned to a license:
48/0/2, 48/0/3, 48/0/4, 48/0/5, 48/0/6, 48/0/7, 48/0/8, 48/0/9, 48/0/10, 48/0/11
48/0/12, 48/0/13, 48/0/14, 48/0/15, 48/0/16, 48/0/17, 48/0/18, 48/0/19, 48/0/20,
48/0/21
48/0/22, 48/0/23, 48/0/24, 48/0/25, 48/0/26, 48/0/27, 48/0/28, 48/0/29, 48/0/30,
48/0/32
48/0/33, 48/0/34, 48/0/35, 48/0/36, 48/0/37, 48/0/38, 48/0/39, 48/0/40, 48/0/41,
48/0/42
48/0/43, 48/0/44, 48/0/45, 48/0/46, 48/0/47, 48/0/48
46 license reservations are still available for use by unassigned ports
4 40G port assignments are provisioned for use in this switch:
0 40G port assignments are provisioned by the base switch license
4 40G port assignments are provisioned by the 40G Port Upgrade license
2 40G ports are assigned to installed licenses:
0 40G ports are assigned to the base switch license
2 40G ports are assigned to the 40G Port Upgrade license
40G ports assigned to the base switch license:
None
40G ports assigned to the 40G Port Upgrade license:
48/0/49, 48/0/50
40G ports not assigned to a license:
48/0/51, 48/0/52
2 license reservations are still available for use by unassigned ports
Reserving a 40G QSFP port while in breakout mode
Network OS Administrator’s Guide
547
53-1003225-04