Brocade Network OS Administrator’s Guide v4.1.1 - Manual (Page 137)

Agent Capabilities (Continued) TABLE 20
Capability MIBs Description
BROCADE-LLDP-EXT-DOT3-CAPABILITY-MIB Provides the implementation details for the LLDP-EXT-
DOT3-MIB
Standard MIBs
Standard MIBs are not distributed through Brocade. You can download the following MIBs from http://
www.oidview.com/ :
• IF-MIB
• LLDP-MIB
• BRIDGE-MIB
• LLDP-EXT-DOT3-MIB
• LLDP-EXT-DOT1-MIB
• RSTP-MIB
• RFC1213-MIB
• IEEE8023-LAG-MIB
• Q-BRIDGE-MIB
• IEEE8021-PAE-MIB
• P-BRIDGE-MIB
• RMON-MIB
• SFlow-MIB
• INET-ADDRESS-MIB
• IANAifType-MIB
• IANA-RTPROTO-MIB
• SNMPV2-MIB
• SNMP-FRAMEWORK-MIB
• IANA-ADDRESS-FAMILY-NUMBERS-MIB
• FC-MGMT-MIB
• SNMP-MPD-MIB
• SNMP-TARGET-MIB
• SNMP-VIEW-BASED-ACM-MIB
• SNMP-COMMUNITY-MIB
• SNMP-MPD-MIB
• SNMP-TARGET-MIB
• SNMP-VIEW-BASED-ACM-MIB
MIB loading order
Many MIBs use definitions that are defined in other MIBs. These definitions are listed in the IMPORTS
section near the top of the MIB. When loading the Brocade MIBs, refer to the following table to ensure
that any MIB dependencies are loading in the correct order.
NOTE
Before loading the Brocade MIB files, ensure that you have the correct version of SNMP for the
Brocade Network OS. All versions of Network OS support SNMPv1, SNMPv2c, and SNMPv3.
SNMPv2c informs are not supported.
Standard MIBs
Network OS Administrator’s Guide 137
53-1003225-04