IAI America TT-C3 - Manual (Page 55)

45
INTELLIGENT ACTUATOR
Chapter 1 Installation
3.
Installation
Environment,
Noise
Measures
and
Other
3.2 Installation
3.2.1 Brackets (Optional)
The Tabletop Robot is fitted with rubber feet to prevent movement on the installed surface. However,
the robot may still move depending on the conditions of use (load, acceleration/deceleration).
Optional brackets securely affix the robot and prevent it from moving.
Install the brackets to the robot using the dedicated T-slots and hexagon socket head bolts (M6x12).
3.2.2 Installing the Load, Etc.
Tapped holes and positioning holes are provided on the X-axis slider (gate type only), Y-axis slider
and Z-axis slider. Use these holes to install a load, tool, etc., to each slider.
For details, refer to the external dimension view of the robot.
Robot brackets (optional)
8- I7 hole