Positioning to five positions – IAI America TT-C3 User Manual

Page 263

253

INTELLIGENT ACTUATOR

Appendix

3. Positioning to Five Positions

Description

Causes the actuator to move to positions 1 to 5 at a speed of 100 mm/sec following a home return.
Only axis 1 is used.

Application program

Position data

x For the actuator to operate, a home return must have been completed

and a speed must be set.

x The actuator moves to the position data coordinates specified by the

movement commands.

Flowchart

Start

Home return

Set speed

Move to P1

Program ends

Move to P2

Move to P3

Move to P4

Move to P5

This manual is related to the following products: