IAI America TT-C3 - Manual (Page 31)

21
INTELLIGENT ACTUATOR
Chapter 1 Installation
2.
Speci
¿
cations
2.2.3 Codes Displayed on the Panel Window
(1) Application
(*1) The priority increases as the number decreases.
Display Priority (*1) Description
AC power is cut off (including momentary power failure or drop in
power-source voltage).
System-down level error
Writing data to the flash ROM.
Emergency stop is being actuated (except during the update
mode)
Safety gate is open (except during the update mode).
Cold-start level error
Cold-start level error
Operation-cancellation level error
Operation-cancellation level error
Waiting for a drive-source cutoff reset input (except during the
update mode).
Operation is in pause (waiting for restart) (except during the
update mode).
All servo axes are interlocked (except during the update mode).
Message level error
Message level error
Core update mode
Core update is in progress.
Core update has completed.
Slave update mode
Slave update is in progress.
Slave update has completed.
Running a program (last started program); “No.” indicates program
number.
Initialization sequence number
Debug mode
Ready status (auto mode)
Ready status (manual mode)
Deadman switch OFF (manual mode)