IAI America TT-C3 - Manual (Page 291)

281
INTELLIGENT ACTUATOR
Appendix
Appendix
~ List of Parameters
If you have any question regarding changing the parameters, please contact IAI’s Sales
Engineering Section. After changing a parameter, record the new and old parameter settings.
If you have purchased the PC software, we recommend that you back up the parameters
immediately after the controller is delivered and when the system incorporating the controller is
started. Since a number of customizing settings use parameters, you should back up the
parameters regularly as you back up the programs.
To make the new parameters effective, write them to the flash ROM and then execute a software
reset or reconnect the power.
The lists below are examples of default values displayed on the PC software. The default
parameter settings vary depending on the operating condition and actuators used.
The values in the “Input range” column represent input limitations on the teaching pendant or in
PC software. For the actual settings, enter the values defined in the “Remarks” column.
Values other than those defined in the “Remarks” column are for future expansion, even when
they are inside the input range.
Therefore, do not enter values other than those defined in the “Remarks” column.