Waiting for multiple inputs – IAI America TT-C3 User Manual
Page 280

270
INTELLIGENT ACTUATOR
Appendix
Appendix
20. Waiting for Multiple Inputs
Description
Causes the actuator to wait for multiple inputs and proceed to the next processing when any of these
inputs turns ON.
Point
With a WTON command, the actuator cannot proceed to the next processing until the specified input
turns ON. In other words, the actuator cannot wait for multiple inputs.
Example of Use
Monitor inputs 19 and 20. When either input turns ON (19 “OR” 20), the actuator will move to the next
step.
As shown in the sample, it is possible to cause the actuator to wait for input without using a WTON
command. This function also supports operations where multiple input conditions must be combined.
Input 19
Input 20
Next processing
Program a
Program b
Next processing
Next processing
* The same processing is performed in both programs a and b.