Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set User Manual
Page 817

9/Series Grinder
Index
Operation and Programming Manual
xiii
System Timing Screen, 8-37
T
T Word, 10-36, 13-1
programming, 13-2
Tape Format, 10-2
Tape Punch
DSI SP75, 9-4
Facit 4070, 9-4
Facit N4000, 9-4
Tape Punches, 9-13
Tape Reader
Decitek AB 8000---XPDR, 9-4
Facit N4000, 9-4
Ricoh PTR240, 9-4
Tape Readers, 9-9
Target Position Display, 8-9
Testing Programs, 7-18, 7-21
Text, Changing Language, 8-23
Text, Language Mode, 8-23
Threading
on angled wheel grinder, 14-6
single pass threading (G33), 18-14
thread cutting, considerations, 18-12
variable lead (G34), 18-19
Time, 2-44
Time and Count Display
changing date, 2-47
changing time, 2-47
clearing/resetting a field, 2-48
Time Parts Count Display, 2-44
Tool Path, Displaying, 8-24
Trailing Zero Suppression (TZS), 10-17
Transfer of Control Commands, 20-7
TRVRS, 2-10
Turning Cycle Operations
single pass diameter (G20), 18-2
single pass facing (G24), 18-7
two step mode, angled-wheel grinders, 14-9
U
Uploading Part Programs to ODS, 6-12
V
Values, Intrepretation of Zeros, 10-17
virtual axis, 14-1
W
Warning Wheel Diameter, 21-9
Wheel, Gauging (G37), 19-3
Wheel Geometry Offset Table, 3-11
wheel length offsets, on an angled-wheel grinder, 14-17
Wheel speed, maximum RPM, 21-9
Word Descriptions, 10-21
Word Format, Zero Suppression, 10-17
Word Format and Functions, 10-17
Work Coordinate System, 11-4
work coordinate system offsets, on an angled-wheel grinder,
14-17
Work Coordinate System Operations, 3-18, 3-19
Work Coordinate System Table, entering labels, 3-22
Z
Zeros, How Interpreted, 10-17
Zones, 11-34
programmable, 11-35
programmable zone 2, 11-35, 11-38
programmable zone 3, 11-35, 11-40
resetting, 11-43
software overtravel, 11-35
zones, on an angled-wheel grinder, 14-17
Zooming, 8-33