Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 230)

Displays and Graphics
Chapter 8
8-10
{TARGET} (Large Display)
The coordinate values in the current work coordinate system, of the end
point of commanded axis moves in normal size characters.
Figure 8.8
Results after Pressing {TARGET} Softkey
PRGRAM A B S TARGET D T G AXIS
SELECT
E-STOP
TARGET [ MM ] (ACTIVE PROGRAM NAME)
X - 7483 . 647
Z - 7483 . 647
U - 7483 . 647
F 0.000 MMPM S 00