End of appendix – Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set User Manual
Page 804

G-Code Table
Appendix C
C-4
Surface
Grinder
Cylindrical
Grinder
Group
Number
Function
Modal or
Non-modal
G82.1
Plunge grind with predress
-- --
G82.1
Incremental face grind with predress, axis 1 plunge
G83
-- --
Incremental plane grind, axis 1 plunge
-- --
G83
Incremental plunge grind, axis 2 plunge
G83.1
-- --
Incremental plane grind, axis 1 plunge with predress
-- --
G83.1
Incremental plunge grind, axis 2 plunge with predress
G84
-- --
Incremental plane grind, axis 2 plunge
-- --
G84
Multi-pass face cycle
G84.1
Incremental plane grind, axis 2 plunge with predress
-- --
G84.1
Multi-pass face cycle with predress
G85
-- --
Continuous plane grind, axis 1 plunge
-- --
G85
09
Multi-pass diameter plunge
Modal
G85.1
-- --
Continuous plane grind, axis 1 plunge with predress
-- --
G85.1
Multi-pass diameter plunge with predress
G86
-- --
Continuous plane grind, axis 2 plunge
-- --
G86
Shoulder grind cycle
G86.1
Continuous plane grind, axis 2 plunge with predress
-- --
G86.1
Shoulder grinder cycle with predress
-- --
G87
Face plunge shoulder cycle
-- --
G87.1
Face plunge shoulder cycle with predress
-- --
G88
Diameter plunge shoulder cycle
-- --
G88.1
Diameter plunge shoulder cycle with predress
G90
G90
03
Absolute mode
G91
G91
Incremental mode
G92
G92
00
Maximum CSS spindle RPM, coordinate offset
Non-modal
G92.1
G92.1
Cancel offsets
G92.2
G92.2
Cancel select offsets and G92 presets
G93
G93
05
Inverse time feedrate mode
Modal
G94
G94
Feed per minute feedrate mode
G95
G95
Feed per revolution feedrate mode
G96
G96
17
Constant surface speed on
G97
G97
RPM spindle speed mode (CSS off)
END OF APPENDIX