Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 34)

Chapter 2
Operating the Control
2-14
Jog Axis Screen
After accessing the software front panel screen and selecting the various
features for your application, you can use the jog axis screen to:
jog the axes of the control
shift the current work coordinate system to force the current wheel
position to be the zero point of the work coordinate system
To jog the axes of the control:
1. Press the {JOG AXIS} softkey. The {JOG AXIS} softkey is only
available when mirror image or axis inhibit are not in reverse video.
If one these features is in reverse video, press the up cursor key.
(softkey level 2)
JOG
AXIS
PRGRAM
EXEC
You see the jog axis screen:
SET
ZERO
JOG
AXIS +
JOG
AXIS -
PROGRAM [INCH] F 0.000 MMPM
R X 0.000 S 0.0
Z 0.000 T 0
FILENAME
SUB NAME
MEMORY MAN STOP
AXIS SELECT: X
JOG SELECT: CONTINUOUS
SPEED/MULTIPLY LOW
HPG NUMBER 0
E-STOP