Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 233)

Displays and Graphics
Chapter 8
8-13
{DTG} (Large Display)
The distance from current position to the command end point of the
commanded axis move in large characters.
Figure 8.11
Results After Pressing {DTG} (Large Display) Softkey
PRGRAM A B S TARGET D T G AXIS
SELECT
DISTANCE TO GO[ MM ] (ACTIVE PROGRAM NAME)
X 0.021
Z 0.000
U 0.000
F 0.000 MMPM S 00
E-STOP