Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 141)

Editing Programs On Line
Chapter 5
5-21
The control displays the first QuickPath Plus sample pattern screen:
CIRCLE, ANGLE, POINT ANGLE, CIRCLE, POINT
ANGLE, POINT CIRCLE , CIRCLE
CIR
ANG PT
CIR
CIR
ANG
CIR PT
ANG
PT
QUICKPATH PLUS MENU 1
2. Select a sample pattern matching the part geometry you want to
program and press the corresponding softkey.
To select other sample patterns, press the continue softkey {
→
}.
3. After selecting the sample pattern, enter values for the parameters in
this way:
Use the up and down cursor keys to select the parameter to change
or enter. The selected item appears in reverse video.
Type in the data on the input line of the CRT and press the
[TRANSMIT] key. The data typed in is entered as the data for the
selected parameter.