Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set User Manual

Page 811

9/Series Grinder

Index

Operation and Programming Manual

vii

program, 22-13
request, 22-15

Italian, Language Display, 8-23

Japanese, Language Display, 8-23

Jog on the fly, 4-6

Jog Retract, 2-10, 7-27

Jog Select, 2-9

Jogging

arbitrary angle jog, 4-5
continuous jog, 4-3
HPG jog, 4-4
incremental jog, 4-3
jogging an axis, 4-2
Jogging at Rapid (TRVRS), 2-10

jogging, angled-wheel grinders, 14-14

Jogging in auto mode, 4-6

Keyboard, 2-3

L Word, 10-35

program interrupts, 22-3

Languages, Changing, 8-23

Leading Zero Suppression (LZS), 10-17

Length Offset Table, 3-11

Length offsets for in process dresser, 21-6

Limits

hardware, 11-36
resetting, 11-43
software, 11-36
spindle speed, 12-43

Linear Acc/Dec, 12-65

Linear Interpolation Mode (G01), 12-3

Local Parameters, 20-13

Log, of errors, 2-38

Look Ahead, Block, 15-59

M Code Status Display, 8-16

M Codes, 10-29

M00 program stop, 7-17, 10-31, 20-48
M01 optional program stop, 7-17, 10-31
M02 end of program, 10-31
M19 spindle orient, 12-51
M30 end of program with tape rewind, 10-32
M48 Override Enabled, 10-32, 12-58, 12-59
M49 Override Disabled, 10-32, 12-58, 12-59
M58 CSS enable, 10-32, 12-42
M59 CSS disable, 10-33, 12-42
M96 enable program interrupts, 22-2
M97 disable program interrupts, 22-2
M98 subprogram call, 10-13, 10-33
M99 end of main program, 10-33
M99 paramacro return, 10-33
M99 subprogram return, 10-14, 10-33

M Word, 10-29

M-Codes

M03 Primary Spindle Clockwise, 12-74
M04 Primary Spindle Counterclockwise, 12-74
M05 Primary Spindle Stop, 12-74
M19 Primary Spindle Orient, 12-72
M19.2 Aux Spindle 2 Orient, 12-72
M19.3 Aux Spindle 3 Orient, 12-72

M900

M904 dressing interrupts, 22-13

M900 Interrupt retrace blocks, 22-6

Machine Coordinate System, 11-2

motion (G53), 11-3

Machine Information, 8-33

Machine Messages, 2-37

clearing, 2-40

Macro

call commands, 20-48
nesting, 20-57
output commands, 20-59

Main Program Jumps, 10-35

Main Program Sequence Starting #:, 8-31

Main Program Sequence Stopping #:, 8-31

Maintaining in process dresser offsets, 21-6

Manual Data Input Mode, 4-13

Manual Gap Elimination, 4-6

Manual Homing, 4-11