Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 46)

Chapter 2
Operating the Control
2-26
3. Press the softkey that corresponds to the access level for which you
want to assign access to functions. The pressed softkey appears in
reverse video. The password name assigned to that access level is
moved to the “PASSWORD NAME.”
(softkey level 3)
UPDATE
& EXIT
01
(NAME)
02
(NAME)
03
(NAME)
04
(NAME)
STORE
BACKUP
UPDATE
& EXIT
05
(NAME)
06
(NAME)
07
(NAME)
08
(NAME)
Important: If you want to change the functions available to an
access level that is equal to or higher than the current user’s access
level, the error message “ACCESS TO THIS LEVEL IS NOT
ALLOWED” appears. A user cannot change the features that are
assigned to his current access level or any level that is higher than his
own.
4. If you want to:
a. enter or change the password (NAME) for the selected level,
edit the password (NAME) next to the “PASSWORD NAME”
prompt by using the input cursor as described on page 2-41.
b. change the functions for this password, move on to step 5.
c. save the change made to the password and leave the access
control screen, press the {UPDATE & EXIT} softkey.
Functions that are currently available to the selected level appear in
reverse video on the access level screen.
5. Use the up, down, right, and left cursor keys to select the functions to
change for that access level. The selected function appears with a
flashing > to the left of the function.
6. Press the [TRANSMIT] key to toggle the function between accessible
and inaccessible for that access level.