Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 225)

Displays and Graphics
Chapter 8
8-5
{PRGRAM} (Small Display)
Axis position in the current work coordinate system displayed for all
system axes in the active process (only available when more than 9 axis are
AMPed in the system, or more than 8 axis in the process for dual process
systems).
Figure 8.3
Results After Pressing {PRGRAM} (Small Display) Softkey
PRGRAM A B S TARGET D T G AXIS
SELECT
PROGRAM[ MM ]
X -9999.647
Y -3333.647
Z -1111.647
U -2222.647
V -2222.647
W -2222.647
A -2222.647
B -2222.647
C -2222.647
$X -2222.647
$Y -2222.647
$Z -2222.647
F 0.000 MMPM S 00