Rockwell Automation 8520-GUM 9/Series CNC Grinder Operation and Programming Manual Documentation Set - Manual (Page 237)

Displays and Graphics
Chapter 8
8-17
{PRGRAM DTG}
This screen provides a multiple display of position information from the
program screen and the distance to go screen.
Figure 8.15
Program, Distance to Go Screen
E-STOP
PROGRAM DISTANCE TO GO [ MM ]
X - 7483.647 X 0.031
Y - 7483.647 Y 0.000
Z - 7483.647 Z 0.000
F 0.000 MMPM S 0
M CODE PRGRAM
D T G
ALL