HP Integrity NonStop H-Series - Manual (Page 164)

Creating and Managing Software Revisions
DSM/SCM User’s Guide — 529846-014
8 - 15
Creating Software Revisions
Creating Software Revisions
On the host system, the planner creates a new software revision identifying the
products to install on the logical target.
1. From the Configuration Revisions window:
a. Select the logical target for which you are creating a new revision.
b. Click New software revision to copy the product list from the most recent
revision to the new software revision.
2. From the Software in Archive window:
a. Select a software input containing the new software that was just received into
the archive.
b. Click Copy to to copy all new and changed products in the software input.
DSM/SCM displays the Confirmation dialog box.
c. From the Confirmation dialog box, click Continue.
DSM/SCM displays the NonSUT Products dialog box so that you can retain
independent products and third-party products that are not on the SUT.
3. From the NonSUT Products dialog box:
a. Click Select All to copy all products in the list from your current configuration
to the new revision.
b. Click Continue.
If the Gxx SUT, which is being copied to, has both the heap manager products
(T8431 and T1269), DSM/SCM displays the Heap Manager Selection dialog
box.
4. From the Heap Manager Selection dialog box:
a. Select the desired heap manager (T8431 or T1269) that must be installed on to
the target system.
b. Click Continue to copy the SUT (with the selected heap manager) to the new
software revision.
c. Click Cancel to cancel the Copy to operation.
Note. The Heap Manager Selection feature is supported only on systems running
G06.29 and later G-series RVUs.