Task 2: reconfigure the host database – HP Integrity NonStop H-Series User Manual
Page 118

Configuring DSM/SCM
DSM/SCM User’s Guide — 529846-014
5 - 33
Reinitializing DSM/SCM
Task 2: Reconfigure the Host Database
Only a host system contains a host database. If you reinitialized a target system,
proceed to
Task 3: Reconfigure the Target Database
Reinitializing a host system removes all the default host and target system information
in the host database. You must reconfigure the host database to set the defaults for
DSM/SCM operations such as user security, file transfer, and scheduling options. All
target information that you update in the host database must also be updated in the
target database.
1. Add a planner ID. For more information, see
2. Use the ZPHIHMI to configure the system profile for this system. For more
information, see
Updating the System Profile Information (ZPHIHMI or ZPHITMI)
3. Designate the volumes to use for the archive or scratch space on this system. For
more information, see
4. Add database administrators for this host system. For more information, see
Setting Security for Database Administrators
5. Update the Configuration Manager Profile. For more information, see
Task 2: Configure the Host Database
Task 2.1: Set Planner Security
___
Run the ZPHIHMI on the host system:
> Volume $DSMSCM.ZDSMSCM
> RUN STARTSCM
> RUN ZPHIHMI
___
Log on to the ZPHIHMI.
Enter the dsmscm-
user-id
, password, and
press F1
___
Select Security Maintenance.
Enter 3 and press F1
___
Select Planner Security Maintenance.
Enter 1 and press F1
___
Type a planner user ID or alias to add.
planner-user
or alias123
___
Set the DSM/SCM tasks the planner can perform.
All set to yes
___
Add planner.
F7
___
After all planners are added, return to main HMI menu.
Shift-F16
___
Exit the ZPHIHMI.
Shift-F16
Task 2.3: Update System Volume Usage
___
Select Maintain>Volume Maintenance.