HP Integrity NonStop H-Series - Manual (Page 376)

Running CNFGINFO
DSM/SCM User’s Guide — 529846-014
C - 3
Entering CNFGINFO
Entering CNFGINFO
1. If running CNFGINFO by itself, run STARTCFG on your PC:
> STARTCFG
Otherwise, check that DSM/SCM is started. See Starting DSM/SCM on page 2-2.
2. To run CNFGINFO either:

Select Start>Programs>Dsm_scm>CNFGINFO.

In the Planner Interface main window, select Tandem>Run CNFGINFO tool.
CNFGINFO displays the CNFGINFO Tool Logon dialog box.
3. Enter your user ID or alias and password and then click OK.
CNFGINFO displays the Select DSV Location dialog box:
For detailed information on using CNFGINFO, see Section C, Running CNFGINFO .
Exiting CNFGINFO
1. In the Select DSV Location dialog box, click OK. CNFGINFO saves all changes
you made during the session and returns to the main task window.
2. Select File>Exit.
3. If you have no further DSM/SCM activities to perform, on the host system:
a. Check that ZDSMSCM is the current subvolume.
b. Run STOPSCM.
c. If you are running CNFGINFO by itself, stop $ZPHC.
VST028.vsd