HP Integrity NonStop H-Series - Manual (Page 329)

Generating DSM/SCM Reports
DSM/SCM User’s Guide — 529846-014
18 - 8
Preparing a Report for Printing or Viewing
2. Supply values for run-time parameters, as necessary.
(For example, the Software Contents report requires you to specify the name of a
software input as a parameter. The report then lists the files contained in the
specified software input.)
a. Select the parameter.
b. Click Modify parameter....
DSM/SCM displays the Modify Parameter Value dialog box, containing data
fields set to the selected parameter’s name, type, value, and description.
c. Enter a value for the parameter in the Value field.
DSM/SCM validates entered data according to the rules for the parameter
type. Parameters are case-sensitive.
d. Repeat the preceding three steps for each parameter to be given a value.
e. Click OK
DSM/SCM returns you to the Prepare Request dialog box.
3. Prepare the report.
For printing:
a. Check the Print formatted output location check box if it is not already
checked.
b. To print the report at a location other than the default, enter a spooler name in
the output location field, using standard HP spooler naming conventions.
For online viewing:
VST132.vsd