HP Integrity NonStop H-Series - Manual (Page 266)

Special Troubleshooting and Recovery Procedures
DSM/SCM User’s Guide — 529846-014
14 - 17
Task 8: Start Required Processes
Task 8: Start Required Processes
Use SCF to configure and start the QIOMON, ZZLAN, and SCP processes before you
can start the 4PORT LAN card and the network:
-> ASSUME PROCESS $ZZKRN

-> ADD PROCESS #QIOMON, AUTORESTART 10, CPU ALL, DEFAULTVOL
$SYSTEM.SYSTEM, HOMETERM $ZHOME, OUTFILE $ZHOME, NAME $ZM,
PRIORITY 199, PROGRAM $SYSTEM.SYSTEM.QIOMON, STARTMODE KERNEL

-> ADD PROCESS #ZZLAN, AUTORESTART 10, PRIMARYCPU 0, BACKUPCPU
1, DEFAULTVOL $SYSTEM.SYSTEM, HOMETERM $ZHOME, OUTFILE $ZHOME,
NAME $ZZLAN, PRIORITY 180, PROGRAM $SYSTEM.SYSTEM.LANMAN,
STARTMODE KERNEL, STARTUPMSG "backup-cpu"

-> ADD PROCESS #SCP, NAME $ZNET, PRIORITY 175, AUTORESTART 10,
PROGRAM $SYSTEM.SYSTEM.SCP, PRIMARYCPU 0, BACKUPCPU 1, TYPE
OTHER, STARTMODE SYSTEM, HOMETERM $ZHOME, OUTFILE $ZHOME,
STARTUPMSG "backup-cpu; AUTOSTOP -1"

-> START #QIOMON

-> START #ZZLAN

-> START #SCP

-> EXIT
Task 9: Start the E4SA
Use SCF to configure and start the E4SA and its subsystems:
-> ASSUME PROCESS $ZZLAN

-> ADD ADAPTER E4SA0, LOCATION (1,1,53), TYPE E4SA, ACCESSLIST
(00,01)

-> START ADAPTER E4SA0, SUB ALL

-> ADD LIF LAN00, PIF E4SA0.0.A

-> ADD LIF LAN01, PIF E4SA0.0.B

-> ADD LIF LAN02, PIF E4SA0.1.A

-> ADD LIF LAN03, PIF E4SA0.1.B

-> START LIF LAN00

-> START LIF LAN01

-> START LIF LAN02

-> START LIF LAN03

-> EXIT
Task 10: Configure and Start TCP/IP
Configure and start TCP/IP and its associated processes:
1. From a TACL prompt:
> RUN $SYSTEM.SYS00.TCPIP/NAME $ZTC00, TERM $ZHOME, NOWAIT,
PRI 180, CPU 0/1

> ADD DEFINE = TCPIP^PROCESS^NAME, FILE $ZTC00

> PARAM TCPIP^PROCESS^NAME $ZTC00

> PARAM ZTNT^TRANSPORT^PROCESS^NAME $ZTC00