beautypg.com

Required hardware, Required software, Dsm/scm – HP Integrity NonStop H-Series User Manual

Page 65: Expand

background image

Hardware and Software Requirements

DSM/SCM User’s Guide — 529846-014

3 - 2

Required Hardware

Required Hardware

All Integrity NonStop systems and NonStop S-series systems include all the memory
and disk space required to run DSM/SCM. For DSM/SCM, you need a network
connection to:

Connect to a host from the Planner Interface (located on the PC).

Manage a remote target over an Expand network. You can also use a tape to
communicate between the host and the target. If there is no network configuration,
the target database must reside on the target system.

Required Software

HP uses DSM/SCM to install customer-ordered software on NonStop S-series servers
and Integrity NonStop servers:

The product DSVs have been copied from the SUT to the DSM/SCM archive
($AUDIT.ZPHI*).

The software configuration has been built, applied, and activated in the target
subvolumes ($SYSTEM.Z*).

For all types of NonStop systems that support DSM/SCM, these software products are
required.

DSM/SCM

All Integrity NonStop systems and NonStop S-series systems are shipped with
DSM/SCM installed.

Server-Based Software

You must be running the DSM/SCM T6031G01^ABP or a later product version to
manage an Integrity NonStop system from a NonStop S-series host system.

Client-Based Software

All Integrity NonStop and NonStop S-series systems come with the DSM/SCM client
already installed. To install a newer version, download the DSM/SCM client from the
site update tape (SUT).

Expand

To use an Expand network connection, Expand is required on both the target and host
systems. If you have a host or target system that will use only tape for communication,
Expand is optional and must be specifically licensed.

This manual is related to the following products: