HP Integrity NonStop H-Series - Manual (Page 98)

Configuring DSM/SCM
DSM/SCM User’s Guide — 529846-014
5 - 13
Setting Security for Operators
a. Enter the database administrator’s user ID or alias and press F2 to check
the user’s permissions.
b. To grant a permission, enter Y in its data field. To deny a permission, enter
N in its data field.
DSM/SCM is usually configured by the initial database administrator. By
default, each database administrator has full permission to access the
ZPHITMI. To apply restrictions, set the appropriate flags on the Database
Administrator Security screen.
c. When all permissions are set, press Shift-F2 if you are updating an existing
operator or F7 if you are adding a database administrator.
If more than one page of database administrators exists, make any
changes before pressing F3 to check additional administrators.
a. After you add all database administrators, press Shift-F16 to return to the main
menu.
b. Press Shift-F16 to exit the ZPHITMI.
Setting Security for Operators
The operator initiates tasks on a target system, usually as directed by the planner. For
information about the tasks operators can perform, see
Operator Tasks on page 4-16.
You can establish operators without any permissions, giving them read-only access to
a subset of DSM/SCM functions. They can view items such as configurations and
inputs but cannot make changes.
Use the ZPHITMI to establish and maintain system security for target system
operators. Security information for operators is stored in the target system database.
Adding or Deleting an Operator (ZPHITMI)
1. From the ZPHITMI, select 3 (Security Maintenance menu); then press F1.
DSM/SCM displays the Security Maintenance menu.
2. From the Security Maintenance menu, select 1 (Operator Security Maintenance);
then press F1. DSM/SCM displays the Operator Security Maintenance screen.
3. From the Operator Security Maintenance screen, press Shift-F4. DSM/SCM
displays a list of all operators for this target system.
You can page through the list by using the PgUp and PgDn keys. Press F16 to
return to the Operator Security Maintenance screen.

To add an operator or change security permissions for an operator:
a. Enter the operator’s user ID or alias; then press F2 to check information
about the operator. To grant a permission, enter Y in its data field. To deny
a permission, enter N in its data field.