HP Integrity NonStop H-Series - Manual (Page 186)

Building and Applying a New Configuration
DSM/SCM User’s Guide — 529846-014
9 - 9
Build/Apply Request Dialog Box

DSM/SCM indicates whether system generation and a system load (cold load) are
required. However, DSM/SCM is not always able to determine if a new
configuration can be applied to a running SYSnn subvolume accurately until after
the Apply. For more information, see the DSM/SCM Help.

If the changes require a new operating system image, the Build/Apply Request
dialog box displays this message. DSM/SCM will run a system generation
program to generate the new system image:
SYSGEN is required for this configuration.

If the change does not affect the operating system, system generation is not
required. DSM/SCM displays the message:
SYSGEN is not required for this configuration.
Figure 9-1. Build/Apply Request Window