HP Integrity NonStop H-Series - Manual (Page 348)

Generating DSM/SCM Reports
DSM/SCM User’s Guide — 529846-014
18 - 27
System View
System View
The System View (=PHIH_PTARGET_PRF_SVIEW) contains information from the
system profiles for target systems:
Tape Drives View
The Tape Drives View (PHIH_TAPE_DRIVE_SVIEW) contains information about tape
drives for a particular target system:
Input_Type The type of the software input:
S SUT (RVU)

N NPV (Initial PVU)

I IPM (SPR)
Vendor_Name The name of the product’s vendor. For HP software, the
value is Tandem Computers, Inc.
Input_Desc_Text Text describing the software input, entered by the planner
in the Planner Interface
Column Name Description
System_Name The target system name
Revision The revision number of the system profile
CPU_Type The processor type of the target system: TNS, TNS/R, or
TNS/E
Cnfg_Mgr_Name The name of the host system that manages the target system
Network_Connection_Flag A value indicating whether DSM/SCM is to use an Expand
connection to the host:
Y Yes

N No
Site_ID The site identification number
Snapshot_Medium_Flag Flag indicating whether snapshots are written to tape or disk:
D disk

T tape
SW_Version_Level The version number of the software on the physical target
Column Name Description
System_Name The name of the target system
Tape_Drive_Name The tape drive name
Tape_ID A 6-character identifier that should be on the external tape label
Column Name Description