HP Integrity NonStop H-Series - Manual (Page 210)

Activating New Software on a Target System
DSM/SCM User’s Guide — 529846-014
10 - 3
Print the Instructions for Activating the Software
Print the Instructions for Activating the
Software
To print the operator instructions:
1. Log on to the ZPHITI.
2. At the ZPHITI main menu, enter 3 (Perform target activities) in the Selection
number field, and press F1. DSM/SCM displays the Target Menu - Select Target
screen.
3. From the list of targets in the Target Menu - Select Target screen, enter the number
for the target on which the new software was applied; then press F1. If this is the
first Apply for the target, choose number 1 (NEW CONFIG). After the software is
applied, NEW CONFIG is replaced with the actual target name.
DSM/SCM displays the Target Menu - Select Action screen.
4. From the Target Menu - Select Action screen, enter 3 (Review operator instructions
for the last apply completed) in the Selection number field and press F1.
DSM/SCM displays the operator instructions. Use the PgUp and PgDn keys to
page through the operator instructions.
5. Print the instructions. Verify the output location; then press F9. The instructions are
printed at the location shown in the Print operator instructions on field.
6. Press Shift-F16 to exit the ZPHITI.
Example: Planner Instructions to Operator
Activation instructions for \configuration-name
DSM/SCM generates its general instructions based on configuration attributes. For
detailed information on migrating to this software configuration, see the release
documentation and softdocs. Note any site-specific tasks added by the planner.
1. Stop all applications. Keep OSS running.
Before activating new software, you must stop all running applications (except the
OSS environment) on the target system that contain or depend on files that are
being changed. The safest practice is to stop all applications, but there are
exceptions to this standard, depending on the software being configured:

If software that is audited by TMF or protected by Safeguard is being updated,
you need to leave those programs running. The planner should specify this in
the instructions. Running ZPHIRNM in PREVIEW mode displays a message if
TMF must be running to rename certain files.
Caution. This is an example. You must follow the exact instructions that you receive because
they are customized to your particular revision by DSM/SCM, and to your particular site or
system by the planner.