HP Integrity NonStop H-Series - Manual (Page 191)

Building and Applying a New Configuration
DSM/SCM User’s Guide — 529846-014
9 - 14
Setting Output Options
To change the TSV locations from the TSV Locations dialog box:
1. Select one or more TSV names

To remove a volume, click Remove from volume.

To place a copy of the TSV on another volume:
a. Click Add to volume.
b. DSM/SCM displays a list of volumes. From the volumes list, select the
volume to add or move the TSVs to, or enter the primary and alternate
names of the volume. (If an alternate name exists, you must specify it and
the primary name.)

To move the TSV to another volume:
a. Click Move to volume
b. DSM/SCM displays a list of volumes. From the volumes list, select the
volume to add or move the TSVs to, or enter the primary and alternate
names of the volume. (If an alternate name exists, you must specify it and
the primary name.)
a. Click OK.
Setting Output Options
The target profile provides the Build/Apply default output options. Check the output
options and change as needed for this Build/Apply. Changing the values for this
Build/Apply request does not change the defaults in the target profile. To change the
output options for this build/apply request:
1. In the Build/Apply Request window, click Output.